[TUT]WEP CRACKING IN WINDOWS [FULL GUI,WITH PICS]

[You must be registered and logged in to see this link.]

[You must be registered and logged in to see this link.]

INTRODUCTION :Many
Windows users here are struggling to hack WiFi networks because most of
the tutorials are based on BackTrack and other Linux Tools .

Im
just sharing the method to Crack WiFi networks using WEP security
protocol . The WEP is a very vuarable to attacks and can be cracked
easily .
It
takes about 5-6 hours if the password is weak a high signal of the WiFi
network you are going to hack and you have sometimes 10-12 for more
complicated passwords and if the WiFi signal of the Network is weak .
The time taken also changes if the WiFi network you are going to hack has many other clients already accessing it .

You will be using two tools .
1.Commview for WiFi :
You will use this tool for capturing the packets sent and recieved through the Access Point you are going to hack .
The more packets you capture the better chances of cracking the password .
You will need more than 1,00,000 minium packets to crack the password .
The packets will be captured in the .ncp format .
You will use this tool to convert the .ncp to .cap .

NOTE
: Some WiFi cards are supported by Commview only in Windows 7 so i
suggest you install Win 7 in ur Virtual Machine if ur card isnt
supported .

2.Aircrack-Ng GUI :
You
will use this tool to crack the password of the Access Point using the
.cap files you obtained from the Commview application .

NOTE : You need to run this as administrator .

I have provided links for both the software below .

Download Links :

These are the links to the official website of the tools .
Some Anti Viruses might detect Aircrack as a virus . It is a false positive .

1.Aircrack-NG GUI
Get it from here :[You must be registered and logged in to see this link.]

2.Commview for Wifi
Get it from here : [You must be registered and logged in to see this link.]

GET READY TO CRACK :

STEP 1 :1.Install CommView for WiFi . It doesnt matter whether you install it in VoIP mode or Standard mode . I used VoIP .
It automatically installs the necessary drivers . Allow it to install .

NOTE : You will not be able to connect to any Network using WiFi when using CommView .

STEP 2 :2.Click on the PLAY ICON in the Left First .
[You must be registered and logged in to see this image.]

STEP 3 (Choosing the Network (a) ) : A new window should pop up now .
Click on the START SCANNING button .
[You must be registered and logged in to see this image.]

STEP 4 (Choosing the Network (b) ) :Click on the WiFi network you want to hack in the Right Coulumn and Click on CAPTURE.
NOTE : This tutorial is only for WEP protected networks .

[You must be registered and logged in to see this image.]

STEP 5 (Capturing the Packets) :The windows should close now and you should see that CommView has started Capturing Packets .

[You must be registered and logged in to see this image.]

STEP 6 (Saving the Packets ) :Now that the Packets are getting captured you need to Save them.
Click on Settings->Options->Memory Usage
Change Maximum Packets in buffer to 20000

[You must be registered and logged in to see this image.]

Click on the LOGGING Tab .
Check AUTO-SAVING
In the Maximum Directory Size : 2000
Average Log File Size : 20

[You must be registered and logged in to see this image.]

Now CommView will automatically Start Saving packets in the .ncp format at a size of 20MB each in the specified directory .

STEP 7 ( Concatenating the Logs ) :Since you are capturing a lot of logs you will need to concatenate them into once file .
To do this go to Logging and click on CONCATENATE LOGS
Choose all the files that have been saved in your specified folder and Concatenate them .

Now you will have one .ncf file .

STEP 8 (Converting .ncf to .cap ) :Now that you have one file with all the packets you need to Convert it into .cap file for AIRCRACK to crack .
Click on File->Log Viewer->Load Commview Logs-> Choose the .ncf file
Now File->Export->Wireshark/TCP dump format .

------------------------------------------------------------------

Aircrack Part :

Now for the Second Part Cracking this is very simple .

Just open the Aircrack Folder->Bin->Aircrack-ng GUI.exe

Choose the .cap file and you should be able to do the others .

credits goe's to:google

if you have any question just post it here and i'll try to answer all your q..

Administrator Posts : 5628 Join date : 2011-03-12

Nice tutorial. Keep it up!

» WEP Wifi hacking/cracking guide
» Windows XP to Windows 7 Transformation Pack!
» cracking porn passwords step by step : by"MenzTration"
» Windows Vps Service
» Windows Transformation

[TUT]WEP CRACKING IN WINDOWS [FULL GUI,WITH PICS]

[TUT]WEP CRACKING IN WINDOWS [FULL GUI,WITH PICS]

Similar topics

Similar topics